Wireless RS-232 Transceiver
Remote your RS-232 device
WILDR-MIU provides a wireless RS-232 interface port for applications
that require wireless connectivity. This interface is capable of speeds
ranging from 4.8 to 115.2 kbps. RF output power is sufficient for a range of few hundred feet indoors (depending on building construction and material composition), and 1-mile outdoors [LOS]. FCC certified. In the figure below, the RS-232
data port, and the console port are standard DB-9 connectors.
A
PC/laptop running a serial communication program such as RealTerm
[Download]
is connected to the console port via a serial cable,
or a DB-9 to USB cable (provided) for initial radio configuration. The
Console port is used to configure the wireless radio parameters such as
frequency channel, data rate, and interface. There are a variety of
tools built-in the firmware to assist in configuring the radio in the
field. These tools can be used to measure RF channel noise so the
installer can select a clean channel. Also, the radio can be put in test
mode where a constant carrier, or a modulated carrier is transmitted
continually to facilitate range-finding.
Each data packet is encrypted using a random key per packet. Keys are
not transmitted in the payload, therefore capturing the packet by a
third party is not a security risk. For added security, there is also a
three-character code selected by the user that makes the encryption
specific to the site. All standard keyboard characters are allowed with
the exception of function keys. This feature does not allow radios from
other sites to function in your site. The radio is supplied with complete documentation including a
quick-start and a user reference manual. For more information,
please
contact us.
For Pricing schedule click here
, or see Pricing under the contact tab.